TIPS & TRICKS - ENSURING A FLAWLESS NEW SHOWER UNIT INSTALLATION

Tips & Tricks - Ensuring A Flawless New Shower Unit Installation

Tips & Tricks - Ensuring A Flawless New Shower Unit Installation

Blog Article

Schedule Today!



What're your opinions on How to Install a Direct-to-Stud Shower Enclosure?


How to Install a Direct-to-Stud Shower Enclosure
A successful shower installation calls for cautious preparation as well as a lot of work. In many cases, you will require to do 3 sorts of jobs: mounting walls, installing the plumbing, and finishing wall surfaces.

Prep work


First of all, you should choose the type of shower that you wish to mount. It is necessary to establish whether the selected shower is capable of coping with particular systems and also can control a safe degree of water with the boiler. Most shower devices nowadays are developed to be adaptable to different water pressures (such as saved hot water and cool keys).
It is likewise important to think about the water stress and the preparation of the piping and also drain for the shower

Different Types of Shower Units


  • Push-on Mixer: The hose pipe and also spray parts of the push-on mixer shower system can be connected to the bathroom tap as per your need, as well as the water temperature can be readjusted by means of the faucets. Push-on mixers are cheap as well as incredibly simple to set up. However, although the pipe connection is simple, it is conveniently dislodged. In addition, it is troublesome to readjust the temperature level.

  • Bath/Shower Mixer: The hose and also spray of this type of shower are incorporated with a bath mixer faucet, as well as the temperature can be changed through the bathroom taps. It is a really inexpensive alternative as well as no extra plumbing is included. However, the bath/shower mixers likewise suffer from troublesome temperature level control options.

  • Guidebook Mixer: The hose as well as spray of a hand-operated mixer shower system belong of the wall device and the cold and hot water supplies are linked to a solitary valve The temperature and also pressure of the water are controlled with either one or a variety of handles (in more pricey showers). Although temperature control is a lot easier in manual mixer kinds, they are more costly than the formerly discussed mixers. They likewise call for additional plumbing of hot and cold water system pipelines.

  • Thermostatic Mixer: The hose pipe as well as spray of this shower kind belong of the wall surface unit as well as the cold and hot water materials are attached to a single shutoff here as well. It is full with a built-in stabiliser to self-adjust the water temperature level and to avoid it from coming to be too warm. Among the most significant advantages of a thermostatic mixer shower kind includes practical temperature level control. However, it is the most costly of the various mixer alternatives.

  • Power Shower: A power shower is a single unit containing a powerful electric pump that is capable of changing both the water stress and also temperature. This type of shower can be fitted if there is supply of water from a cold water tank and a hot water cylinder. A power shower makes the modification of both stress and temperature simple. On the other hand, it disagrees for water heated directly by the shower or where the water is supplied by a mix boiler under keys stress.

  • Electric Shower: An electric shower is plumbed into a keys cold water supply as well as it warms the water electrically. It is very important to note that for this shower kind to be mounted, the keys stress requires to be at least 0.7 kg/sq cm (10lb/sq in). The system enables the temperature level and also stress to be adjusted through a knob. Designs with temperature level stabilisers are much better as they continue to be unaffected by other taps elsewhere in use within the home. A major disadvantage of electrical showers is that the control handle just permits the alternative of heats at much less stress, or reduced temperature levels at a better stress. This is problematic in the winter season when the spray is usually weak and also the keys water is cooler. However, this trouble is taken on in some versions which are readily available with a winter/summer setup.


  • Approach


    Relying on the sort of shower you desire to mount, the shower head have to either be suited order to prevent its contact with the water in the bathroom listed below or the base tray, or it needs to have a check valve.
    Before starting, it is recommended to mark the positions of the shower head and also control, and also to intend the pipe-work entailed. In addition, the drain system to eliminate the waste water will need to be intended. Both placements of the cord path as well as the shower switch will additionally require to be thought about if an instant or electric shower system is being set up.
    Use the guideline guide provided with the shower device to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is essential to remove the water system. In order to safeguard the pipelines, they ought to be given a water-proof covering as well as likewise fitted with separating shutoffs. The pipes can after that be buried right into the wall and also glued over to neaten the overall appearance.
    Fit the base tray, shower head, and installations.
    Connect the major shower control to the pipes that will certainly be supplying the water (This might need a women screw thread adapter).
    Reconnect the water supply and examination the pipes for any kind of leakages, as some may require tightening up.
    If you are installing an electric shower, remember to turn off the electrical energy supply before making any kind of electrical links. When these connections have actually been made (there should be advice within the instruction manual), the power supply can be switched back on.

    Changing Water Pressure to Fit Your Shower


    The cold water reservoir can be raised to a better height (occasionally as low as 150mm (6inches)) by installation a strong wood support under it - potentially made up of struts as well as blockboards. If you choose this choice, the major as well as circulation pipes will certainly also need to be raised to satisfy the new height of the storage tank.
    Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it needs to be attached into the power supply in order to operate.

    Piping as well as Water drainage


    It is best to use 15mm diameter supply pipelines, and also make the runs to the shower as short as well as straight as feasible so as to maintain maximum stress and also minimise warm loss. Furthermore, by reducing the use of elbow joints for pipe edges, you can lower the resistance in the circulation of the water. You can achieve this by bending the pipes instead.

    A Lot Of Usual Mistakes


  • Violating or ignoring regional code limitations.

  • Making use of pipelines that are also small.

  • Attaching copper to galvanized without utilizing a brass or dielectric fitting between both.

  • Not making use of tape or pipeline substance at threaded joints.

  • Uneven your components when mounting them.

  • Not installing an air gap loading for components.

  • Cutting supply stub outs too short to set up the shutoff valves onto after the ended up wall surface is in place.

  • Not appropriately lining up tubes right into installations or stop valves. (Forcing the nut onto the compression ring at an angle when the tubing goes to an angle will certainly create a leakage.).

  • When transforming the water back on in your house, constantly run the outdoors tube valve or flush your toilets to bleed dirt as well as air from the lines. This particles can trigger troubles in your sink taps and also various other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.



    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.



    Are you confused?



    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.



    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.



    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.



    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.



    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.



    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Build a Shower Enclosure for Your DIY Bathroom

    As a serious reader about How to Install a Direct-to-Stud Shower Enclosure, I imagined sharing that excerpt was a smart idea. In case you enjoyed reading our article if you please don't forget to share it. Bless you for your time. Visit again soon.




    Schedule Appointment


    Report this page